About the performance and characteristics of Cut-size sheeting machine
- Categories:Cut-size sheeter News
- Time of issue:2022-08-25
The performance and characteristics of Cut-size sheeting machine:
1. The Cut-size sheeting machine adopts PLC and touch screen control, magnetic powder clutch tension control, and center coiling method.
2. The main machine adopts frequency conversion speed regulation, which can automatically count meters, alarm and stop, and all tension figures are displayed on the touch screen.
3. The unwinding adopts photoelectric automatic deviation correction (or ultrasonic deviation correction) to correct the neat edge of the paper, so that the irregular material can be cut normally.
4. Circular knife (or straight knife) slitting, waste edge automatic discharge device.
5. Manual (or pneumatic) feeding and unwinding with taper-sleeve type inflatable shaft (3" or 6").
6. The rewinding adopts A and B shafts (inflatable).
In order to make the machine work normally and cut out high-quality finished products, check the condition of each part of the machine from time to time and add oil to each lubrication point.
The use environment of Cut-size sheeting machine:
The quality of the equipment's use environment directly affects the characteristics and service life of electrical appliances and components. The environment in which the equipment is installed should:
1. Good indoor ventilation.
2. Ambient temperature—10℃+40℃.
3. Try to avoid high temperature and humidity, the humidity is less than 90%RH, and there is no rain dripping.
4. Avoid direct sunlight.
5. No flammable, corrosive gas and liquid.
6. The installation foundation is fixed without vibration.
7. No electromagnetic interference, stay away from interference sources.