Advantages of Automatic A4 paper cutting and wrapping machine.
- Categories:Automatic A4 paper cutting and wrapping machine News
- Time of issue:2021-07-26
Advantages of Automatic A4 paper cutting and wrapping machine. A4 paper cutting manual cuts paper at a rate of 50 sheets per minute and uses a pressurised water supply. When you cut a sheet of A4 paper, a large cutting tool is used to cut the paper. This is a very efficient paper cutter and can deliver papers as heavy as 20 pounds per box. uses a very similar system as cutting paper but uses a high pressure water supply along with a high speed, pressurised water system. If you are cutting paper in a large office space with water supply, and paper weighing 80 pounds, it is worth considering.
What is the structure of Automatic A4 paper cutting and wrapping machine?Most Automatic A4 paper cutting and wrapping machines are controlled by a computer, with the machine control coming from a key on the front of the machine which is known as a manual key.The manual key control is connected to the automatic cutter, with the front of the machine being covered by a removable plate called the face plate, which is also referred to as the cover plate.It allows the manual key control to be removed with a lever on the front of the machine, which is fitted with a locking lever on the reverse end. This automatically opens automatically when something is removed from the face plate.When an automatic machine is switched on, it will display the automatic cutting key information. When the automatic cutter is turned on, it will take a set of marks on its face plate and cut those marks into paper.
Structural characteristics of Automatic A4 paper cutting and wrapping machine. The Automatic A4 paper cutting and wrapping machine adopts PLC and touch screen control, magnetic powder clutch type tension control, and center winding method. It can automatically count meters, alarm and stop. All tension figures are displayed on the touch screen. The unwinding adopts photoelectric automatic correction (or ultrasonic correction) to correct the neat edges of the paper, so that irregular materials can be slit normally. Round knife (or straight knife) slitting, automatic waste edge discharge device. Manual (or pneumatic) loading and unwinding shaft with taper sleeve type inflatable shaft. Rewinding adopts A and B axis.