Application of Cut-size sheeter

Cut-size sheeter is widely used in light industry to cut various paper, plastic film, leather and other similar soft materials. Usually Cut-size sheeter adopts relay logic control method, which uses many components, large equipment volume and low reliability. A programmable controller was used to carry out technical transformation of the Cut-size sheeter, and satisfactory results were achieved.

With the development of enterprises and the intensification of competition in the printing industry, many small and medium-sized printing companies that only engaged in simple single product printing or printing of several fixed products in the past have to expand their business scope and engage in small batches and multiple varieties according to market needs. Product printing. The diversification of products, especially the printing of trademarks, requires high dimensional accuracy, large cutting volume, and tight delivery time, which puts forward higher requirements on the Cut-size sheeter.

The Cut-size sheeter is mainly composed of program-controlled paper cutters, equipped with elevators, paper unloading machines and other auxiliary equipment. It can automatically complete paper discharge, sorting, handling, and stacking, with high production efficiency and labor intensity. Low and short auxiliary production time.

After unpacking the Cut-size sheeter, check the integrity of the machine and check whether there is any damage during transportation. After the check is not damaged, the calibration level can be installed on a flat and solid foundation. After the machine is installed and adjusted to the level, comprehensively check whether the parts are intact No damage, whether the connecting bolts are tightened reliably, whether the movable parts are flexible, and then fill the corresponding lubricating parts with the corresponding lubricating oil, check that the lubrication is completed, and then start the machine. Before starting the Cut-size sheeter, read the instructions that came with the machine carefully. When starting, run slowly, wait until everything is normal, and slowly increase the cutting speed until it reaches normal.