Common faults and remedies of Automatic Box Strapping Machine
- Categories:Industry News
- Time of issue:2021-05-25
In today's society, no matter how advanced the science and technology are, the occurrence of faults cannot be ruled out. There is no perfect product, but the spirit of being able to see clearly where the problem lies and be able to make up for it in time is important.
The Automatic Box Strapping Machine, under long-term continuous work, overload work, and excessive use time, often leads to various failures, such as material breakage, uneven packaging film, imperfect sealing of packaging bags, and color Various problems such as inaccurate positioning of the standard, and the packaging machine cannot work normally due to the technical ability of the operator during the working process of the Automatic Box Strapping Machine. It’s not terrible to have mistakes. The terrible thing is that you don’t want to correct it if you know that there is a mistake. Once a fault is found, it will be repaired immediately. If it is serious, it will be reworked and manufactured again.
In response to different failures, Automatic Box Strapping Machine discovered the cause of the failure in time and formulated different remedial measures. The packing material is broken mainly because the packing material has joints or excessively broken burrs, the paper feeding motor circuit is faulty, and the unqualified paper section needs to be removed, and the paper feeding motor circuit is repaired in time, and the paper feeding proximity switch is replaced.
The improper sealing of the packaging bag is mainly due to the uneven inner layer of the packaging material, uneven sealing pressure or low sealing temperature. Unqualified packaging materials should be removed in time, the sealing pressure should be adjusted, and the hot air temperature should be increased.
The inaccurate positioning of the color code is because the bag length setting value is inappropriate. The bag length setting value should be increased because the actual bag length is greater than the standard length of the color code. As for the problems of the operators, it is necessary to promptly switch to skilled personnel to reduce the existence of Automatic Box Strapping Machine failures.