Language

  • img
  • img
  • img
  • img
  • img
搜索
Search
OK
Cancel
联系我们
Check category
>
>
>
How to maintain the Automatic Palletizing Machine from China

How to maintain the Automatic Palletizing Machine from China

Automatic Palletizing Machine from China, as the name suggests, is a machine that provides enterprises with product palletizing. It can be said that the emergence of this machine can really help enterprises provide strong support in the packaging and palletizing process. Therefore, it is very necessary to have a scientific and standardized operation and effective maintenance.

Automatic Palletizing Machine from China

When we buy an Automatic Palletizing Machine from China, the manufacturer will complete the installation, and the next step is to teach the customer how to use it on the spot. Obviously, the on-site teaching will make it difficult for the customer to learn in a short time. At this time, the customer needs to figure it out by himself. . Then you should read the instruction manual of Automatic Palletizing Machine from China carefully. If you don't understand anything when using it, you should contact the manufacturer immediately. You must not operate it by yourself. of after-sales maintenance. Therefore, scientific and standardized operation is more important, which can not only increase the service life, but also facilitate the later maintenance.

So how does Automatic Palletizing Machine from China perform daily maintenance? Next I will focus on it.

The first is the standard maintenance of the Automatic Palletizing Machine from China. When cleaning the robot, use a rag to clean all parts, and when necessary, you can use a pneumatic device to clean the dust; Automatic Palletizing Machine from China is working one day. In the case of vibration, check whether the screws are loose at this time and tighten them; the next step is to check whether the limit stops are worn and loose, and at the same time check the cables and the mechanical zero position. Measurement, if there is a problem, it should be replaced and trimmed in time.

The second is the oil replacement of the Automatic Palletizing Machine from China. For example, the oil in the gear box needs to be replaced once a year or 12,000 hours of work. At the same time, the daily maintenance of the robot control cabinet, the backup inspection and Disk space defragmentation, which can be checked with power on. The control cabinet should then be cleaned and the heat dissipation checked.

In the subsequent maintenance of the Automatic Palletizing Machine from China, it is worth paying special attention to. If the parts of the palletizing machine are deviated during use, they need to be adjusted carefully, because this may affect the overall production trajectory. influence. When it stops working, it is necessary to check whether the fault is caused by insufficient battery power. It is necessary to know that the zero position will be lost after the power is exhausted.
 

language
中国
韩国
韩国
韩国
韩国
韩国

About us

Service hotline:

Add:No.6, Jinzishan Rd., Rui’an, Wenzhou City, Zhejiang Province, China 
Tel:0577-6588848265888481
Fax:0577-65888480

Foreign trade business: Mr. Liu  13818631306

Message

Copyright © 2020 RUIAN DONGTENG MACHINERY CO., LTD.   浙ICP备18003386号  www.300.cn