Introduction to installation and adjustment of Automatic A4 paper cutting and packing machine

Automatic A4 paper cutting and packing machine should check the integrity of the machine after unpacking, check whether there is any damage during transportation, etc. After checking no damage, the calibration level can be installed on a flat and solid foundation. After the machine is installed and calibrated, check the various parts Whether it is intact and undamaged, whether the connecting bolts are tightened reliably, whether the moving parts are flexible, and then fill the corresponding lubricating parts with the corresponding lubricating oil, check that the lubrication is completed and confirm that it is correct before starting the machine. Before starting the machine, carefully read the accompanying instructions. When everything is normal, slowly increase the cutting speed until it reaches normal.

The Automatic A4 paper cutting and packing machine is suitable for the slitting of all kinds of super large coils, so that the products can be rolled up neatly without running edges. It has high-speed, easy-to-operate, slitting rules and a beautiful appearance.

Performance and characteristics of Automatic A4 paper cutting and packing machine
1. Automatic A4 paper cutting and packing machine adopts microcomputer control, magnetic powder clutch type tension control, and center winding method.
2. The main machine of Automatic A4 paper cutting and packing machine adopts frequency conversion speed regulation. Automatic meter counting, alarm and other functions.
3. The unwinding adopts a photoelectric automatic correction and correction system, so that irregular materials can be cut normally or (gas-sensitive oil pressure type edge system).
4. Round knife slitting (or flat knife structure) waste edge automatic discharge device.
5. Automatic A4 paper cutting and packing machine can manually load and unwind the reel with air expansion shaft.