Introduction to the performance and characteristics of Paper sheeting Machine

Performance and characteristics of Paper sheeting Machine:

1. Paper sheeting machine adopts PLC and touch screen control, magnetic powder clutch type tension control, and center winding method.
2. The paper sheeting machine host adopts frequency conversion speed regulation, can automatically count meters, alarm and stop, and all tension numbers are displayed on the touch screen.
3. The unwinding adopts photoelectric automatic correction (or ultrasonic correction) to correct the neat edges of the paper, so that irregular materials can be slit normally.
4. Round knife (or straight knife) slitting, automatic waste edge discharge device.
5. Manual (or pneumatic) loading and unwinding shaft with taper sleeve type inflatable shaft (3 "or 6 ").
6. Rewinding adopts A and B axis (inflatable type).
In order to make the machine work normally and cut out high-quality finished products, the conditions of each part of the Paper sheeting Machine should be checked from time to time and the lubrication points should be refueled.

The use environment of Paper sheeting Machine:

The use environment of the equipment directly affects the characteristics and service life of electrical appliances and parts. The environment in which the equipment is installed should:

1. The room is well ventilated.
2. Ambient temperature -10℃+40℃.
3. Try to avoid high temperature and humidity, humidity is less than 90%RH, and no rain drops.
4. Avoid direct sunlight.
5. No flammable, corrosive gas and liquid.
6. The installation foundation is fixed without vibration.
7. The Paper sheeting machine has no electromagnetic interference and is far away from the interference source.